Pumps are required to generate pressurised oil from a tank or reserviour to provide flow and pressure in a circuit, in order to provide this output from a pump, a means of generation is required.
It is recommended that customers review their volumetric requirements and pump operator type before purchasing.
Hand pump – Using mechancial force via an operator.
Pneumatic pump – Using a flow rate of pressurised air to generate the force required to operate this type pump.
• All metal construction (excluding PA6), won’t burn through in welding environments.
• Formed metal handle provides less flex, and reduces operator fatigue.
• Convenient fill port on P23 and P55 allows pumps to be filled in a horizontal or vertical position.
• Fill cap seal acts as safety valve preventing over-pressurizing of reservoir.
• Relief valve inboard of check valve prevents loads from drifting down.
• Large valve knob gives added control for slowly metering loads down.
(SPX PowerTeam 2019)
© Berendsen Fluid Power Pty Ltd ABN 29 058 390 382
Branches
Engineered Solutions
Knowledge Hub
